P0741 Code (Symptoms, Causes, and How to Fix)

Last Updated on January 4, 2022

If your vehicle has an automatic transmission, the torque converter is responsible for adding more drive power to your vehicle’s back wheels. When a P0741 code is active, it means your automatic transmission system’s torque converter is malfunctioning.

Inside the torque converter, a fluid coupling mechanism is tasked with connecting your engine to your transmission. This adds efficiency to your vehicle.

A P0741 code is one of the most common OBD2 trouble codes found in automatic transmission vehicles. If you drive an automatic car, it’s important to check for this trouble code if a check engine light shows up if you want to avoid issues with your transmission.

Let’s take a closer look at the P0741 code, what it means, its symptoms, and how you can fix the root cause of the problem.

What Does Code P0741 Mean?

If you’re experiencing a P0741 code, it points to an issue with your torque converter. If your Powertrain Control Module (PCM) identifies a problem with the transmission input shaft and torque converter’s rotational speeds, it will trigger a P0741 code.

This problem will manifest itself as a difference between the speed of the torque converter and the transmission input shaft.

The P0741 code is not triggered by small differences in rotational speed. There will need to be a difference of at least 200 RPMs before the PCM indicates there is an issue. It’s important to note that this RPM limit can vary depending on your vehicle.

Related: Code P0740

Symptoms of Code P0741

If a P0741 code is active, it doesn’t mean your car will experience other symptoms of malfunction. There can be an underlying issue before you notice physical signs in your vehicle or its performance.

If there are noticeable issues, they’re likely to be small. Let’s explore some indications that you have an issue with your torque converter:

• Your gears aren’t shifting when you drive at high speeds.
• You feel that your engine is misfiring.
• You notice a reduction in fuel efficiency.
• Your check engine light is on.

Causes of Code P0741

There are several causes of a P0741 code. While they’re all linked to your torque converter, the root cause of the problem can vary significantly. Below, let’s take a look at the potential causes of P0741 code:

• Your TCM isn’t working.
• Your valve body isn’t working.
• Your transmission fluid is dirty or old.
• Your coolant temperature sensor isn’t working.
• Your transmission wiring harness is damaged.
• A short is occurring in the TCC solenoid.
• Your torque converter solenoid isn’t working.
• Your torque converter clutch isn’t working.
• The wires around your TCC solenoid are damaged or not functioning correctly.

Is Code P0741 Serious?

Unfortunately, a P0741 code is extremely serious – if you notice this code is active, it’s critical to seek immediate assistance from a professional mechanic. While your car might not be exhibiting any current performance issues, a faulty torque converter can put undue stress on your transmission system and cause irreparable damage.

In fact, if you leave your faulty torque converter to continue to damage your transmission, you may end up requiring expensive repairs in the future. In some cases, you might need to replace your torque converter entirely.

How to Fix

If you want to fix a P0741 code, you need to start by diagnosing the issue. If you can’t correctly identify the root cause of the issue, you won’t be able to find the correct solution.

To Diagnose:

1. Use your OBD2 Scan Tool to check if a P0741 code appears. Make sure to record any data that is returned (you need to ensure the conditions are correct).
2. Check if any other transmission-related codes are active. This might point to the root cause of the issue.
3. Once you complete Step 1 and Step 2, clear your OBD2 scan tool, drive your vehicle, and retest to see if you still have the P0741 code active.

Potential Solutions:

1. Inspect your transmission fluid – if it’s dirty or old, replace it.
2. Inspect the wiring in the transmission wiring harness; if this is the cause of the problem, it will require replacement.
3. Inspect the wiring in the TCC solenoid; if there’s an issue with this wiring, it will need to be replaced.
4. Consider replacing the valve body, ECT sensor, TCC solenoid, torque converter lockup solenoid, or the TC.

If you can’t clear the P0741 code, the best option is to take your vehicle to a mechanic to ensure that you’re diagnosing the problem correctly. If you don’t have extensive experience with cars, it can be hard to fix the issue or find the core source of the problem.

Mechanics are also likely to have additional scan tools that you don’t have. It’s essential to avoid misdiagnosing this problem, so make sure that you’re using your OBD2 scan tool correctly.