6 Engine Misfire Symptoms You Shouldn’t Ignore

Last Updated on November 30, 2022

It can be difficult to diagnose the reason for an engine misfire, but context gives major clues. Misfires are often intermittent and will sometimes only manifest with a specific type of fuel, environment, or engine load (how deep you’re into the gas pedal).

Usually the vehicle can continue running with a misfire in one cylinder, since the others will keep the car in motion. It won’t, however, run normally or without consequences. 

Engine misfire symptoms should not be ignored because a misfiring engine may become damaged over time. The vehicle will also have reduced fuel economy and increased emissions since the engine is working harder to compensate for the slacker cylinder(s).

Related:  Common Causes of an Engine Misfire

What is an Engine Misfire?

A healthy four stroke combustion engine performs a series of actions in the right order and at the right time to burn fuel and make power.

As the piston travels downward, a precise air fuel mixture enters the combustion chamber as the intake valves open. After the valves close, this mixture is compressed as the piston travels upward.

On the power stroke, this air fuel mixture is ignited by the spark plug, further increasing cylinder pressure. This high pressure forces the piston down very quickly, turning the crankshaft in the process.

The exhaust valves open on the exhaust stroke, expelling the burnt gases from the cylinder, and the cycle repeats.  

Misfires are caused by a problem with one or more of the components necessary for combustion (fuel, oxygen, and a spark) or the mechanical components in the system, such as the cylinder itself.

Incorrect timing or one or more cylinders that fail to complete all of the steps both result in an engine misfire. If the air fuel ratio is incorrect, the mixture may not combust at all or may prematurely detonate (colloquially referred to as knock).

See Also: Symptoms of a Bad Knock Sensor

Top 6 Symptoms of an Engine Misfire

Engine misfires can, like many other vehicle problems, manifest with the same symptoms as other issues. The first step in diagnosing the problem is having the vehicle’s computer checked for codes.

Any or multiple of these symptoms should make you suspicious of a misfire. 

#1 – Loss of Power, Stumbling, and Vibration

You may be wondering, “what does an engine misfire feel like?” There may be a palpable loss of power resulting from a vehicle that may be running on fewer cylinders than normal, or a brief hesitation in the delivery of power when gas is applied.

You may also feel intermittent jerking, bucking, or stumbling from the engine. You’ll notice rough and/or slow acceleration.

Vibration while the vehicle is running is common especially if the misfire is caused by a mechanical problem. The severity varies depending on the RPM and is often worse at idle. 

#2 – Abnormal Sounds

So what does a misfire sound like? During a misfire, the engine will make a sudden sound that can be described as popping, sneezing, or backfiring.

Backfiring occurs when unburned fuel exits the cylinder on the exhaust stroke and is then ignited farther in the system by the spark of the next cylinder. 

You may notice an overall change in engine sound if one cylinder is not working at all, since a four-cylinder car will now only have three working cylinders. It’s the same as if a spark plug blew out of the cylinder head.

In addition, the sound of a vacuum leak may also be present in the engine.

#3 – Unusual Smells

Damaged cylinder walls can sometimes cause fluids to leak which leads to a smell of predominantly gas with oil or coolant undertones.

You may even have a melted spark plug wire due to it touching something it shouldn’t be.

#4 – Check Engine Light

After 1995, vehicles came equipped with OBD2 systems to aid in diagnosing engine issues. When any of the vehicle’s sensors detect readings outside their expected values, a check engine light is illuminated and the code is stored in the engine control unit (ECU).

Most OBD2 vehicles will have a code for “Cylinder X Misfire” that will help you locate the problem (where X is the cylinder number that misfired). Sometimes the check engine light will remain illuminated until cleared, but in some cars the light will flash when the misfire occurs.

The check engine light has a variety of potential triggers, so it’s important to get the code read to see what exactly went wrong. Diagnostic trouble codes P0301 through P0312 are common codes that show up. The last 2 numbers indicate which cylinder is having the misfire. For example, P0306 would indicate a cylinder 6 misfire issue.

Code P0300 is another code that may appear as it relates to multiple cylinders misfiring.

Many automotive stores such as Auto Zone can do this for you for free. Write down the code and description of the problem to aid in troubleshooting the problem.

Related Trouble Codes:

• Code P0300
• Code P0301
• Code P0302
• Code P0303
• Code P0304
• Code P0305
• Code P0306

#5 – Struggling Engine

Misfires can sometimes cause difficulty starting the vehicle or stalling of the engine when stopped. The later is even more likely with a high accessory load (such as when using the air conditioner, headlights, and radio). 

#6 – Excessive Exhaust Smoke

Seeing black, blue-tinged, or very white and sweet-smelling exhaust is a sign that something is not right. Dark, sooty exhaust could indicate a rich air fuel mixture or carbon buildup. Blue-tinged exhaust is indicative of burning oil.

White, sweet-smelling exhaust may point to a head gasket leak. Anything in the combustion chamber that is not air or gasoline will affect the vehicle’s ability to burn the mixture as intended.